Author Topic: How change the batteries?  (Read 2138 times)

Bifonio

  • Newbie
  • *
  • Posts: 7
  • Member
    • View Profile
How change the batteries?
« on: April 16, 2014, 11:58:54 AM »
Hi guys, i'm trying to charge the batteries, but mean need to replace them with new, do i need to remove the front fairing? or is possible remove them easily?

Agustel

  • Newbie
  • *
  • Posts: 43
    • View Profile
Re: How change the batteries?
« Reply #1 on: April 16, 2014, 04:47:35 PM »
You dont need to remove the front fairing.
#1561 MH900e
#1732 MH900e
Sport1000
MV F41000S 1+1
998
350 Narrowcase Corse

80ojeck

  • Newbie
  • *
  • Posts: 20
  • Member
    • View Profile
Re: How change the batteries?
« Reply #2 on: April 19, 2014, 10:28:21 AM »
If you have the two small batteries still fitted and need to remove them it is a lot easier if you do remove the front fairing. The fairing removal is relatively easy. The access you will gain will keep the expletives to a minimum.
It's nice to be important, but it's more important to be nice.

Bifonio

  • Newbie
  • *
  • Posts: 7
  • Member
    • View Profile
Re: How change the batteries?
« Reply #3 on: April 20, 2014, 02:53:38 PM »
Well i prefer just fit  them without removing the fairing, even is very thight there

bebou

  • Newbie
  • *
  • Posts: 16
  • Member
    • View Profile
Re: How change the batteries?
« Reply #4 on: April 22, 2014, 03:20:00 PM »
i spent a lot of time and nerves to screw the connections of the batteries without removing the front fairing, my wife had to do it as it was imposible for me to go there with my hands to perform the job.. :)
next time i will , for sure

lordmoonpie

  • Jr. Member
  • **
  • Posts: 65
  • Member
    • View Profile
Re: How change the batteries?
« Reply #5 on: January 04, 2016, 01:46:49 PM »
The fairing comes off with about four screws and can be removed in under 30 seconds, why would you not remove it and also remove the risk of slipping and scratching it. One of the beauties of the Mh900d is that you can strip off the bodywork and tank in minutes and a handful of screws....one of the easiest modern Ducatis ever to work on! 8)